reinstall/initrd-network.sh

#!/bin/ash
# shellcheck shell=dash
# alpine / debian initrd 共用此脚本

mac_addr=$1
ipv4_addr=$2
ipv4_gateway=$3
ipv6_addr=$4
ipv6_gateway=$5
is_in_china=$6

DHCP_TIMEOUT=15
DNS_FILE_TIMEOUT=5
TEST_TIMEOUT=10

# 检测是否有网络是通过检测这些 IP 的端口是否开放
# 因为 debian initrd 没有 nslookup
# 改成 generate_204？但检测网络时可能 resolv.conf 为空
# HTTP 80
# HTTPS/DOH 443
# DOT 853
if $is_in_china; then
    ipv4_dns1='223.5.5.5'
    ipv4_dns2='119.29.29.29' # 不开放 853
    ipv6_dns1='2400:3200::1'
    ipv6_dns2='2402:4e00::' # 不开放 853
else
    ipv4_dns1='1.1.1.1'
    ipv4_dns2='8.8.8.8' # 不开放 80
    ipv6_dns1='2606:4700:4700::1111'
    ipv6_dns2='2001:4860:4860::8888' # 不开放 80
fi

# 找到主网卡
# debian 11 initrd 没有 xargs awk
# debian 12 initrd 没有 xargs
get_ethx() {
    # 过滤 azure vf (带 master ethx)
    # 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000\    link/ether 60:45:bd:21:8a:51 brd ff:ff:ff:ff:ff:ff
    # 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP800> mtu 1500 qdisc mq master eth0 state UP qlen 1000\    link/ether 60:45:bd:21:8a:51 brd ff:ff:ff
    if false; then
        ip -o link | grep -i "$mac_addr" | grep -v master | awk '{print $2}' | cut -d: -f1
    else
        ip -o link | grep -i "$mac_addr" | grep -v master | cut -d' ' -f2 | cut -d: -f1
    fi
}

get_ipv4_gateway() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    ip -4 route show default dev "$ethx" | head -1 | cut -d ' ' -f3
}

get_ipv6_gateway() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    ip -6 route show default dev "$ethx" | head -1 | cut -d ' ' -f3
}

get_first_ipv4_addr() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    if false; then
        ip -4 -o addr show scope global dev "$ethx" | head -1 | awk '{print $4}'
    else
        ip -4 -o addr show scope global dev "$ethx" | head -1 | grep -o '[0-9\.]*/[0-9]*'
    fi
}

get_first_ipv4_gateway() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    if false; then
        ip -4 route show default dev "$ethx" | head -1 | awk '{print $3}'
    else
        ip -4 route show default dev "$ethx" | head -1 | cut -d' ' -f3
    fi
}

remove_netmask() {
    cut -d/ -f1
}

get_first_ipv6_addr() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    if false; then
        ip -6 -o addr show scope global dev "$ethx" | head -1 | awk '{print $4}'
    else
        ip -6 -o addr show scope global dev "$ethx" | head -1 | grep -o '[0-9a-f\:]*/[0-9]*'
    fi
}

get_first_ipv6_gateway() {
    # debian 11 initrd 没有 xargs awk
    # debian 12 initrd 没有 xargs
    if false; then
        ip -6 route show default dev "$ethx" | head -1 | awk '{print $3}'
    else
        ip -6 route show default dev "$ethx" | head -1 | cut -d' ' -f3
    fi
}

is_have_ipv4_addr() {
    ip -4 addr show scope global dev "$ethx" | grep -q inet
}

is_have_ipv6_addr() {
    ip -6 addr show scope global dev "$ethx" | grep -q inet6
}

is_have_ipv4_gateway() {
    ip -4 route show default dev "$ethx" | grep -q .
}

is_have_ipv6_gateway() {
    ip -6 route show default dev "$ethx" | grep -q .
}

is_have_ipv4() {
    is_have_ipv4_addr && is_have_ipv4_gateway
}

is_have_ipv6() {
    is_have_ipv6_addr && is_have_ipv6_gateway
}

is_have_ipv4_dns() {
    [ -f /etc/resolv.conf ] && grep -q '^nameserver .*\.' /etc/resolv.conf
}

is_have_ipv6_dns() {
    [ -f /etc/resolv.conf ] && grep -q '^nameserver .*:' /etc/resolv.conf
}

add_missing_ipv4_config() {
    if [ -n "$ipv4_addr" ] && [ -n "$ipv4_gateway" ]; then
        if ! is_have_ipv4_addr; then
            ip -4 addr add "$ipv4_addr" dev "$ethx"
        fi

        if ! is_have_ipv4_gateway; then
            # 如果 dhcp 无法设置onlink网关，那么在这里设置
            # debian 9 ipv6 不能识别 onlink，但 ipv4 能识别 onlink
            if true; then
                ip -4 route add "$ipv4_gateway" dev "$ethx"
                ip -4 route add default via "$ipv4_gateway" dev "$ethx"
            else
                ip -4 route add default via "$ipv4_gateway" dev "$ethx" onlink
            fi
        fi
    fi
}

add_missing_ipv6_config() {
    if [ -n "$ipv6_addr" ] && [ -n "$ipv6_gateway" ]; then
        if ! is_have_ipv6_addr; then
            ip -6 addr add "$ipv6_addr" dev "$ethx"
        fi

        if ! is_have_ipv6_gateway; then
            # 如果 dhcp 无法设置onlink网关，那么在这里设置
            # debian 9 ipv6 不能识别 onlink
            if true; then
                ip -6 route add "$ipv6_gateway" dev "$ethx"
                ip -6 route add default via "$ipv6_gateway" dev "$ethx"
            else
                ip -6 route add default via "$ipv6_gateway" dev "$ethx" onlink
            fi
        fi
    fi
}

is_need_test_ipv4() {
    is_have_ipv4 && ! $ipv4_has_internet
}

is_need_test_ipv6() {
    is_have_ipv6 && ! $ipv6_has_internet
}

# 测试方法：
# ping   有的机器禁止
# nc     测试 dot doh 端口是否开启
# wget   测试下载

# initrd 里面的软件版本，是否支持指定源IP/网卡
# 软件     nc  wget  nslookup
# debian9  ×    √   没有此软件
# alpine   √    ×      ×

test_by_wget() {
    src=$1
    dst=$2

    # ipv6 需要添加 []
    if echo "$dst" | grep -q ':'; then
        url="https://[$dst]"
    else
        url="https://$dst"
    fi

    # tcp 443 通了就算成功，不管 http 是不是 404
    wget -T "$TEST_TIMEOUT" \
        --bind-address="$src" \
        --no-check-certificate \
        --max-redirect 0 \
        --tries 1 \
        -O /dev/null \
        "$url" 2>&1 | grep -iq connected
}

test_by_nc() {
    src=$1
    dst=$2

    # tcp 443 通了就算成功
    nc -z -v \
        -w "$TEST_TIMEOUT" \
        -s "$src" \
        "$dst" 443
}

is_debian() {
    [ -f /etc/lsb-release ] && grep -iq Debian /etc/lsb-release
}

test_connect() {
    if is_debian; then
        test_by_wget "$1" "$2"
    else
        test_by_nc "$1" "$2"
    fi
}

test_internet() {
    for i in $(seq 5); do
        echo "Testing Internet Connection. Test $i... "
        if is_need_test_ipv4 && test_connect "$(get_first_ipv4_addr | remove_netmask)" "$ipv4_dns1" >/dev/null 2>&1; then
            echo "IPv4 has internet."
            ipv4_has_internet=true
        fi
        if is_need_test_ipv6 && test_connect "$(get_first_ipv6_addr | remove_netmask)" "$ipv6_dns1" >/dev/null 2>&1; then
            echo "IPv6 has internet."
            ipv6_has_internet=true
        fi
        if ! is_need_test_ipv4 && ! is_need_test_ipv6; then
            break
        fi
        sleep 1
    done
}

flush_ipv4_config() {
    ip -4 addr flush scope global dev "$ethx"
    ip -4 route flush dev "$ethx"
}

flush_ipv6_config() {
    # 是否临时禁用 ra / slaac
    if [ "$1" = true ]; then
        echo 0 >"/proc/sys/net/ipv6/conf/$ethx/autoconf"
    fi

    ip -6 addr flush scope global dev "$ethx"
    ip -6 route flush dev "$ethx"
}

ethx=$(get_ethx)
if [ -z "$ethx" ]; then
    echo "Not found network card: $mac_addr"
    exit
fi

echo "Configuring $ethx ($mac_addr)..."

# 开启 ethx
ip link set dev "$ethx" up
sleep 1

# 开启 dhcpv4/v6
# debian / kali
if [ -f /usr/share/debconf/confmodule ]; then
    # shellcheck source=/dev/null
    . /usr/share/debconf/confmodule

    db_progress STEP 1

    # dhcpv4
    # 无需等待写入 dns，在 dhcpv6 等待
    db_progress INFO netcfg/dhcp_progress
    udhcpc -i "$ethx" -f -q -n || true
    db_progress STEP 1

    # slaac + dhcpv6
    db_progress INFO netcfg/slaac_wait_title
    # https://salsa.debian.org/installer-team/netcfg/-/blob/master/autoconfig.c#L148
    cat <<EOF >/var/lib/netcfg/dhcp6c.conf
interface $ethx {
    send ia-na 0;
    request domain-name-servers;
    request domain-name;
    script "/lib/netcfg/print-dhcp6c-info";
};

id-assoc na 0 {
};
EOF
    dhcp6c -c /var/lib/netcfg/dhcp6c.conf "$ethx" || true
    sleep $DHCP_TIMEOUT # 等待获取 ip 和写入 dns
    # kill-all-dhcp
    kill -9 "$(cat /var/run/dhcp6c.pid)" || true
    db_progress STEP 1

    # 静态 + 检测网络提示
    db_subst netcfg/link_detect_progress interface "$ethx"
    db_progress INFO netcfg/link_detect_progress
else
    # alpine
    # h3c 移动云电脑使用 udhcpc 会重复提示 sending select，无法获得 ipv6，因此使用 dhcpcd
    method=dhcpcd

    case "$method" in
    udhcpc)
        udhcpc -i "$ethx" -f -q -n || true
        udhcpc6 -i "$ethx" -f -q -n || true
        sleep $DNS_FILE_TIMEOUT # 好像不用等待写入 dns，但是以防万一
        ;;
    dhcpcd)
        # https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/dhcpcd/dhcpcd.pre-install
        grep -q dhcpcd /etc/group || addgroup -S dhcpcd
        grep -q dhcpcd /etc/passwd || adduser -S -D \
            -h /var/lib/dhcpcd \
            -s /sbin/nologin \
            -G dhcpcd \
            -g dhcpcd \
            dhcpcd

        # --noipv4ll 禁止生成 169.254.x.x
        if false; then
            # 等待 DHCP 全过程
            timeout $DHCP_TIMEOUT \
                dhcpcd --persistent --noipv4ll --nobackground "$ethx"
        else
            # 等待 DNS
            dhcpcd --persistent --noipv4ll "$ethx" # 获取到 IP 后立即切换到后台
            sleep $DNS_FILE_TIMEOUT                # 需要等待写入 dns
            dhcpcd -x "$ethx"                      # 终止
        fi
        ;;
    esac
fi

# 等待slaac
# 有ipv6地址就跳过，不管是slaac或者dhcpv6
# 因为会在trans里判断
# 这里等待5秒就够了，因为之前尝试获取dhcp6也用了一段时间
for i in $(seq 5 -1 0); do
    is_have_ipv6 && break
    echo "waiting slaac for ${i}s"
    sleep 1
done

# 记录是否有动态地址
# 由于还没设置静态ip，所以有条目表示有动态地址
is_have_ipv4_addr && dhcpv4=true || dhcpv4=false
is_have_ipv6_addr && dhcpv6_or_slaac=true || dhcpv6_or_slaac=false
should_disable_ra_slaac=false

# 如果自动获取的 IPv4 地址不是重装前的，则使用之前的
if $dhcpv4 && [ -n "$ipv4_addr" ] && [ -n "$ipv4_gateway" ] &&
    ! [ "$ipv4_addr" = "$(get_first_ipv4_addr)" ]; then
    echo "IPv4 address auto obtained is different from old system."
    dhcpv4=false
    flush_ipv4_config
fi

# 如果自动获取的 IPv6 地址不是重装前的，则使用之前的
if $dhcpv6_or_slaac && [ -n "$ipv6_addr" ] && [ -n "$ipv6_gateway" ] &&
    ! [ "$ipv6_addr" = "$(get_first_ipv6_addr)" ]; then
    echo "IPv6 address auto obtained is different from old system."
    dhcpv6_or_slaac=false
    should_disable_ra_slaac=true
    flush_ipv6_config
fi

# 设置静态地址，或者设置 debian 9 udhcpc 无法设置的网关
add_missing_ipv4_config
add_missing_ipv6_config

# 检查 ipv4/ipv6 是否连接联网
ipv4_has_internet=false
ipv6_has_internet=false
test_internet

# 如果 IPv4 无法上网，并且自动获取的网关不是重装前的网关，则改成静态
if ! $ipv4_has_internet &&
    $dhcpv4 && [ -n "$ipv4_addr" ] && [ -n "$ipv4_gateway" ] &&
    ! [ "$ipv4_gateway" = "$(get_first_ipv4_gateway)" ]; then
    echo "IPv4 gateway auto obtained is different from old system."
    dhcpv4=false
    flush_ipv4_config
    add_missing_ipv4_config
    test_internet
fi

# 如果 IPv6 无法上网，并且自动获取的网关不是重装前的网关，则改成静态
if ! $ipv6_has_internet &&
    $dhcpv6_or_slaac && [ -n "$ipv6_addr" ] && [ -n "$ipv6_gateway" ] &&
    ! [ "$ipv6_gateway" = "$(get_first_ipv6_gateway)" ]; then
    echo "IPv6 gateway auto obtained is different from old system."
    dhcpv6_or_slaac=false
    should_disable_ra_slaac=true
    flush_ipv6_config true
    add_missing_ipv6_config
    test_internet
fi

# 要删除不联网协议的ip，因为
# 1 甲骨文云管理面板添加ipv6地址然后取消
#   依然会分配ipv6地址，但ipv6没网络
#   此时alpine只会用ipv6下载apk，而不用会ipv4下载
# 2 有ipv4地址但没有ipv4网关的情况(vultr)，aria2会用ipv4下载
if $ipv4_has_internet && ! $ipv6_has_internet; then
    echo 0 >"/proc/sys/net/ipv6/conf/$ethx/accept_ra"
    ip -6 addr flush scope global dev "$ethx"
elif ! $ipv4_has_internet && $ipv6_has_internet; then
    ip -4 addr flush scope global dev "$ethx"
fi

# 如果联网了，但没获取到默认 DNS，则添加我们的 DNS
if $ipv4_has_internet && ! { [ -e /etc/resolv.conf ] && is_have_ipv4_dns; }; then
    echo "nameserver $ipv4_dns1" >>/etc/resolv.conf
    echo "nameserver $ipv4_dns2" >>/etc/resolv.conf
fi
if $ipv6_has_internet && ! { [ -e /etc/resolv.conf ] && is_have_ipv6_dns; }; then
    echo "nameserver $ipv6_dns1" >>/etc/resolv.conf
    echo "nameserver $ipv6_dns2" >>/etc/resolv.conf
fi

# 传参给 trans.start
netconf="/dev/netconf/$ethx"
mkdir -p "$netconf"
$dhcpv4 && echo 1 >"$netconf/dhcpv4" || echo 0 >"$netconf/dhcpv4"
$should_disable_ra_slaac && echo 1 >"$netconf/should_disable_ra_slaac" || echo 0 >"$netconf/should_disable_ra_slaac"
$is_in_china && echo 1 >"$netconf/is_in_china" || echo 0 >"$netconf/is_in_china"
echo "$ethx" >"$netconf/ethx"
echo "$mac_addr" >"$netconf/mac_addr"
echo "$ipv4_addr" >"$netconf/ipv4_addr"
echo "$ipv4_gateway" >"$netconf/ipv4_gateway"
echo "$ipv6_addr" >"$netconf/ipv6_addr"
echo "$ipv6_gateway" >"$netconf/ipv6_gateway"
$ipv4_has_internet && echo 1 >"$netconf/ipv4_has_internet" || echo 0 >"$netconf/ipv4_has_internet"
$ipv6_has_internet && echo 1 >"$netconf/ipv6_has_internet" || echo 0 >"$netconf/ipv6_has_internet"